AS1940-2017 outlines a range of compliant storage solutions for flammable liquids. Due to their safe and practical design most organisations use:
The storage requirements for flammable liquids depend on whether they will be stored indoors or outdoors. Segregation of flammable liquids from other classes of chemicals, particularly corrosive substances, is vital for safe storage. See this article for comprehensive information on storing flammable liquids, and get our free guide to chemical segregation here.
A flash point is the lowest temperature of a flammable liquid at which its vapours will ignite (if given an ignition source). Flammable fuels will usually emit vapour as the temperature increases and they become more gaseous. The flash point is the point at which there will be sufficient vapour for the substance to ignite.
It’s important to become familiar with flash points to avoid costly and dangerous incidents. See this article for examples of common flammable liquids and their flash points.
The Globally Harmonised System (GHS) is a globally-recognised system created by the UN for the classification and labelling of hazardous chemicals.
The GHS has been mandatory in Australia since the 1st of January 2017, for all newly produced or imported products. This means you must use GHS compliant labelling on primary and secondary packaging, and safety data sheets (SDS).
Read more about the GHS and actions you’re required to take here.
Depending on the contents of the gas cylinder, storage must be regulated carefully. All gas cylinders should be handled, transported and stored as if full, as there is almost always gas remaining at the bottom of every cylinder. Hazardous gases must be stored in temperature-controlled and well ventilated spaces.
If you’re storing any Class 3 Flammable Liquids, you’ll need specially crafted cabinets to safely and compliantly store them (as per AS1940-2017). See this article for more information.
It’s quite common for workplaces to hold at least a small amount of flammable liquids on site. Even if these flammable liquids are stored in small quantities, they can easily ignite and cause significant damage. However, AS1940 states that a cabinet is not required if the quantity of flammable liquids is classified as “minor storage.” This article will help here.
The 9 classes of dangerous goods are:
Corrosive substances are volatile substances that destroy body tissue as soon as they make contact with exposed skin, eyes, respiratory tract, making the safe storage of such substances crucial.
Common corrosives include hydrochloric acid, sulfuric acid, sodium hydroxide, potassium hydroxide, nitric acid, chromic acid, acetic acid and hydrofluoric acid; all of which can cause significant damage if mishandled or stored incorrectly. See our range of safe storage containers for corrosive materials here.
Our Dangerous Goods Compliance Audits are an end-to-end assessment of your compliance with all Australian dangerous goods standards. They include:
To ensure that all changes have been actioned and your compliance is within Australian standards, a Dangerous Goods Adviser will return to evaluate the site.
Violent reactions occur when two or more incompatible chemicals are stored together. Effectively segregating dangerous goods is essential for preventing devastating accidents. Download our free guide on segregating the 9 dangerous goods classes for chemical-specific information.
Each of our cabinets has different features depending on the dangerous goods class which it will store. Key features are outlined below. Australian Standards provide different specifications for indoor and outdoor storage facilities, depending on the class of dangerous good.
Required features of an indoor storage cabinet include:
Outdoor dangerous goods storage facilities (detached stores) are more sturdy and designed to withstand the outdoor environments. Required features of a detached store include:
The Australian Standards only allow using indoor storage cabinets in outdoor environments if “adequate protection against weather, corrosion and traffic damage is provided.”
Even though our indoor dangerous goods storage cabinets have been manufactured to a high standard, we do not recommend using them in outdoor environments.
Our outdoor dangerous goods stores are more heavy duty and provide superior protection against weather, corrosion and traffic damage. View these here.
All STOREMASTA PPE cabinets and indoor dangerous goods storage cabinets are fitted with a key-lockable L-handle.
STOREMASTA relocatable outdoor dangerous goods stores are fitted with ISO-locking bars that can be padlocked. These dangerous goods stores are not supplied with padlocks.
STOREMASTA gas cylinder stores are fitted with padbolts that can be padlocked. STOREMASTA doesn’t provide the padlocks.
The Australian standard AS1940-2017 states “aerosols of classes 2.1 and 2.2 may be stored in a store for class 3 dangerous goods if projectile protection (e.g. cages) is provided.” STOREMASTA can custom manufacture flammable storage cabinets to provide projectile protection.
As aerosols do not present any spill risk, they can also be stored in an aerosol storage cage that provides projectile protection. STOREMASTA manufacture a comprehensive range of aerosol storage cages.
Our headquarters are in Burnie, Tasmania. We also have plants in Sydney and Melbourne, and stock product in New Zealand.
Yes, we have a number of reliable freight partners that provide international shipping solutions. In the past we have supplied dangerous goods storage products to companies based in New Zealand, Papua New Guinea, Vietnam and Oman.
All indoor dangerous goods storage cabinets, gas cylinder stores and bunding are stocked in capital cities for next day dispatch. Large outdoor dangerous goods stores and custom dangerous goods storage products are made to order in 3-4 weeks. We can provide premium or express services when needed.
Yes, we provide a 12 month warranty for all dangerous goods storage products.
We accept credit card payments and bank transfers.
STOREMASTA stock product in every Australian capital city and in New Zealand.
Fill out the form below and one of our compliancy specialists will be in touch within the next 24 hours.